Today was our second recall after we did delivery last 2 weeks. It was well fabricated of upper partial denture (PD) and lower complete denture (CD) by Miss Reem. We did not find hard on the first and second visit with our cooperative patient, Mr Hasan because the steps for taking impression and casting were the same as we did last semester on CD patient.
I did the upper PD while my partner did the lower CD. I must say that my case on upper RPD was quiet easy because first, its upper teeth that we were doing, and second its acrylic base denture with additional clasp. When we were doing denture, we have to focus on the upper teeth apperance and it must have certain visibility (2mm) to add aesthetic when smiling.
In the other hand, my partner had some difficulties with the lower teeth setting. Once the upper wax rim had setup good on upper, only then we can adjust the lower teeth. He had to reduce some occlusal wax rim on the third visit as some tooth had supra-errupted on the upper. Then, on the delivery day, he had to make some adjustment on the denture because of over extended flanges, widening the freni opening, and reduce thickness of the denture. Perhaps, we had over put the impression material on lower during second visit that made the flanges over thickness that final result was quiet unsatisfied. Or maybe, just because the lab technician over put the acrylic base plate that made it so bulky?
However, not to point other faults, we need to be more concern each visit especially on the second impression visit because it is ultimate working procedure that can give figure of the final result. Slight changes will make different on the denture that will be produced.
Before I ended up my post today, I am so thankful Allah had given us a chance to do goods. Thanks to Dr Anas, my supervisor because he had helped me and my partner Dr Abdullah Anas alot through out the each visit. Next person to remember is Miss Reem because she did a good lab work and very dedicated on finishining it on time. Last but not least, everyone in the clinic who had help us whenever we asked for help. May Allah blessed us each day.
Hope to write mote. Till the, bye!
I did the upper PD while my partner did the lower CD. I must say that my case on upper RPD was quiet easy because first, its upper teeth that we were doing, and second its acrylic base denture with additional clasp. When we were doing denture, we have to focus on the upper teeth apperance and it must have certain visibility (2mm) to add aesthetic when smiling.
In the other hand, my partner had some difficulties with the lower teeth setting. Once the upper wax rim had setup good on upper, only then we can adjust the lower teeth. He had to reduce some occlusal wax rim on the third visit as some tooth had supra-errupted on the upper. Then, on the delivery day, he had to make some adjustment on the denture because of over extended flanges, widening the freni opening, and reduce thickness of the denture. Perhaps, we had over put the impression material on lower during second visit that made the flanges over thickness that final result was quiet unsatisfied. Or maybe, just because the lab technician over put the acrylic base plate that made it so bulky?
4th visit; try in denture. Excellent work from the lab!
However, not to point other faults, we need to be more concern each visit especially on the second impression visit because it is ultimate working procedure that can give figure of the final result. Slight changes will make different on the denture that will be produced.
5th visit; delivery day! The polishing effect was out standing and the patient satiesfied with its look.
After 2nd Recall today, we hope today is the last recall. We gave alot explanation and motivation to Mr Hasan; to wear it more frequent so that he get use with the denture under, since this is the first time he wearing denture.
Hope to write mote. Till the, bye!
No comments:
Post a Comment